Yamaha TW200 Carrier

$1,095.00 USD

Hitch carrier designed especially for Yamaha TW200’s.

The Nose Cone that stops the bikes front tire is for 130, 140 fronts.

The rear of bike channel flares out to fit a 180 rear.

This model is a little shorter than our MX Carrier to ensure the TW200 is centred on the carrier.

All parts are laser cut, deburred and CNC press brake folded.

Our 415V welding is spot on, we regularly get compliments.

All Steel parts are Deburred, Sandblasted, Primed then Powder Coated.

High Tensile Bolts with Nyloc Nuts are used throughout.

This carrier is of 90% Aluminum construction.

5 Year Structural Warranty 

This carrier is designed for serious off road use!

Rack N Ride TW200 Hitch Carrier is supplied with:

Hardware to bikes pegs – Snap Hooks, Turnbuckles, Shackles plus a strap to stop turnbuckles vibrating loose.

Front Tie Down Bar – So you can strap off the handlebars or triple clamp as a back up.

Loading Ramp – 70″L x 6″W Aluminum Stores between the bike and vehicle on carrier for transport.

LED Light Kit – Including licence plate light, you need to supply your own connector as we cannot source from Australia.

Anti Tilt Bracket – Including Shim Plates to eliminate movement in your vehicles hitch receiver.

Can be supplied with 2.5″ Main Bar for Super Duty Hitches.

The Carrier weighs 70lbs including the Loading Ramp. The Loading Ramp weighs 11lbs so if you remove that to install on vehicle brings carrier weight down to 59lbs.

THIS PRODUCT WILL BE AIRFREIGHTED TO YOUR DOOR FROM OUR FACTORY IN AUSTRALIA.

ESTIMATED DELIVERY TIME 7-10 DAYS, PRICE INCLUDES AIRFREIGHT.

SELECT $100 FLAT RATE SHIPPING OPTION PLEASE.

 

Category: SKU: RNRUSYATW1

Description

Rack N Ride’s newest hitch carrier in the range is the Yamaha TW200 carrier, this will be airfreighted directly to your door from the Rack N Ride factory on the Gold Coast in Australia.

Note: HARDWARE and SECURING your Motorcycle You must secure your motorcycle from four points to the TW Carrier. The hardware to the bikes foot pegs is two points, you must also use a tie down strap each side of the motorcycle to the front tie down bar. This is to provide a safety backup for your motorcycle to prevent it falling off the carrier in the event of hardware failure.

Additional information

Brand

Rack N Ride

Capacity

Rated to 370lbs

Carrier Weight

88lbs

Materials

Aluminum

Max Rear Tire Width

180

Ramp Length

70"

Ramp Width

6"